Graphics: Card: Intel ValleyView Gen7 bus-ID: 00:02.0 Mobo: ASUSTeK model: X200MA version: 1.0 Bios: American Megatrends version: X200MA.504 date: ĬPU: Dual core Intel Celeron CPU N2815 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7466Ĭlock Speeds: 1: 931.00 MHz 2: 798.00 MHz Machine: System: ASUSTeK (portable) product: X200MA version: 1.0 With time and patience, you will learn how to find the sweet spot for clock speeds and stability.Code: Select all System: Host: Lappy-X200MA Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2)ĭesktop: N/A Distro: Linux Mint 17.1 Rebecca Lower the settings once the computer starts freezing while in Windows or if other anomalies occur. Return to the BIOS and incrementally change the “CPU Frequency” and “DRAM Frequency” settings. The new CPU speed will be listed next to “Processor.” Type “Msinfo32” in the “Run” box and press the “Enter” key. Press the “Windows" and “R” keys simultaneously. Press the “Y” or “Enter” key to confirm your changes and to exit the BIOS.īoot into Windows. This will display a confirmation dialog box. Look at the bottom of the screen for a message similar to “Save Settings and Exit” and press the corresponding key. Since you have only increased the “CPU Frequency” by 10 MHz, you can leave this setting alone. Once you increase the “CPU Frequency” beyond a point the RAM can handle, you will need to lower the “DRAM Frequency” to accommodate the change. The higher the “CPU Frequency,” the lower the “DRAM Frequency” setting will need to be or vice-versa. This page will display settings related to your RAM and PCI bus.Īrrow to “DRAM frequency.” This setting and the “CPU Frequency” are directly related. Highlight “Chipset Configuration” and press the “Enter” key. This will take you back to the “Advanced” tab.
Highlight “CPU Frequency” and press your arrow or “Page Down” keys to move the number up by “10” This will increase the overall CPU bus by 10 MHz. Highlight “Overclock Mode” and use the arrow or “Page Down” keys to change the option to “Manual” or “CPU.” Use your arrow keys to select “CPU Configuration” while on the “Advanced” tab and press the “Enter” key.
Press the “Y” or “Enter” key to confirm your changes and to exit the BIOS. Highlight “Auto” or “Automatic” and press the “Enter” key. Highlight “AI Overclock” or “Automatic Overclocking” and press the “Enter” key. This loads a Configure System Frequency/Voltage screen. Use the “Arrow” key to select the “Advanced” tab at the top of the BIOS Setup screen.Īrrow to “JumperFree Configuration” or “AI Overclocking” by using your arrow and “Enter” keys.
0 kommentar(er)
